I have deployed GitHub - GeiserX/genieacs-docker: Automated configuration files for your GenieACS deployment successfully on a server and am trying to connect the D-link router to the genieacs. I have entered the acs url as http://server-ip:7547(7547 port is public over the server) and the username and password as admin and admin. but the router is not connecting to the acs. Also i was able to connect the router connecting a LAN cable to my laptop. I connected it to the geniacs locally on my laptop. Now my router is over the internet and I want to connect it to the acs but am failing. Kindly please help, I’ll very thankful to you for the same. I checked the router logs.
- Repeated Log Entries for
tr069_notify_redirect
tr069_notify_redirect[240]: is_configuring_by_tr069 0 buf off
This indicates that TR-069 is **not actively configuring** the router (`is_configuring_by_tr069 0`), meaning the device may not be attempting to contact the ACS at all.
* **DMS Redirect State Output Shows TR-069 is Inactive**
dms_redirect_state_output[240]: is_active = no is_factory = no is_con_up_v4 = yes is_con_up_v6 = no is_flashing = no is_configuring = no
is_active = no→ TR-069 is not active.is_con_up_v4 = yes→ IPv4 connectivity is available.is_configuring = no→ The router is not currently applying any TR-069 configuration.- DMS Redirect Config Output Shows TR-069 Settings
dms_redirect_cfg_output[240]: enable = yes, cable = yes, connections = yes, factory = yes, flashing = yes
* TR-069 (`enable = yes`) is enabled.
* `connections = yes` suggests that networking is functional.