- Connection #0 to host 192.168.1.40 left intact
2022-12-12 11:53:47 [easycwmp] NOTICE - received SetParameterValues method from the ACS
2022-12-12 11:53:47 [easycwmp] NOTICE - external: execute set value Device.ManagementServer.ConnectionRequestPassword 25x147rcmuj
2022-12-12 11:53:47 [easycwmp] NOTICE - external: execute apply value
2022-12-12 11:53:47 [easycwmp] NOTICE - send SetParameterValuesResponse to the ACS - Found bundle for host: 0x55d1ee340850 [serially]
- Re-using existing connection #0 with host 192.168.1.40
- Connected to 192.168.1.40 (192.168.1.40) port 7547 (#0)
I have seen connection request…It’s makes the device to contact with acs…But here CPE will initiate or ACS ?..I need to know any possible ways are there to server initiate a session with device
A CPE can initiate a connection to the ACS at any time. The CPE can also be requested to initiate a connection to the ACS by making a request to the ConnectionRequestURL. This is something the ACS handles itself.
Mine doubt is ACS can initiate a session Is it possible…Acs can do any operation like firmware upgrade or get or set operation without cpe initiate a session…ACS can initiate first?
I have installed genieacs
tell me ACS can trigger to initiate the session by using connection request
The information you need is present in the replies to this forum post.