Mikrotik + genieacs

1

hello i’m new here and i’ve also met genie acs now, i’m looking for tutorials for a contenco mikrotik network for routing and using genie acs for autoconfiguration of routers can anyone help me out

2

To configure a MikroTik router as a client for TR-069 communication with a remote ACS (Auto Configuration Server), you need to follow these steps:

  1. Log in to the MikroTik router using the Winbox application or the web interface.
  2. Click on the “System” menu and then click on “Packages”. Make sure that the “RouterOS-Extras” package is installed.
  3. Click on the “System” menu again and then click on “Auto Upgrade”. Enable the “Check for updates” and “Download and install updates” options.
  4. Click on the “IP” menu and then click on “DHCP Client”. Add a new DHCP client with the following settings:
  • Interface: Select the WAN interface of the router.
  • Use Peer DNS: Check this option if you want to use the DNS server provided by the DHCP server.
  • Add Default Route: Check this option if you want to add the default gateway provided by the DHCP server.
  1. Click on the “IP” menu again and then click on “Firewall”. Add a new firewall rule with the following settings:
  • Chain: Input
  • Protocol: TCP
  • Dst. Port: 7547
  • Action: Accept
  1. Click on the “System” menu and then click on “Packages”. Check that the “tr069-client” package is installed. If not, install it.
  2. Click on the “System” menu again and then click on “TR-069 Client”. Configure the TR-069 client with the following settings:
  • Enable: Check this option to enable the TR-069 client.
  • ACS URL: Enter the URL of the ACS server.
  • Periodic Inform Interval: Enter the interval at which the router should send periodic inform messages to the ACS server.
  • Connection Request Username: Enter the username for the connection request (if required by the ACS server).
  • Connection Request Password: Enter the password for the connection request (if required by the ACS server).
  1. Click on the “Save” button to save the TR-069 client settings.

After completing these steps, the MikroTik router should be configured as a client for TR-069 communication with the remote ACS server. The router will periodically send inform messages to the ACS server, and the server can send configuration commands to the router as needed.