# WLAN diagnostic (doesnt show up)

**URL:** <https://forum.genieacs.com/t/wlan-diagnostic-doesnt-show-up/3483>\
**Category:** Uncategorized\
**Created:** [January 31, 2023, 6:31am UTC](https://forum.genieacs.com/t/wlan-diagnostic-doesnt-show-up/3483 "2023-01-31T06:31:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Clxxcv](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/clxxcv/32/1013_2.png) [@Clxxcv](https://forum.genieacs.com/u/Clxxcv)\
**Post date:** [January 31, 2023, 6:31am UTC](https://forum.genieacs.com/t/wlan-diagnostic-doesnt-show-up/3483/1 "2023-01-31T06:31:28Z")

</div>

Hello fellows!  
Currently im stuck at Displaying “Neighbor’s SSIDs” near the customer’s router.

> how i started that diagnostic ?  
> (I changed the Value to “ **Requested** ”)  
> **InternetGatewayDevice.WIFI.NeighboringWiFiDiagnostic.DiagnosticsState**  
> after a minut IDiagnosticsState change to **Complete/Error/Canceled**  
> Here we have that (parameter): which pop up with neighbors SSIDs  
> **InternetGatewayDevice.WiFi.NeighboringWiFiDiagnostic.Result. {i}** ( i represent each SSID)
> 
> ![image](https://canada1.discourse-cdn.com/flex035/uploads/genieacs/original/2X/d/d35a876a28e752aed3e81af1963f51f6161abc74.png)

> In Admin \> Config \> Edit Device page \> Added:

- label: “‘SSID neighbors’”  
parameter: InternetGatewayDevice.WiFi.NeighboringWiFiDiagnostic.Result.\*.  
type: “‘parameter-table’”  
childParameters:
  - label: “‘SSID’”  
parameter: SSID
  - label: “‘BSSID’”  
parameter: BSSID
  - label: “‘RSI’”  
parameter: SignalStrength
  - label: “‘Channel’”  
parameter: Channel
  - label: “‘Bandwidth Mhz’”  
parameter: OperatingChannelBandwidth
  - label: “‘Interval’”  
parameter: BeaconPeriod
  - label: “‘Security Type’”  
parameter: SecurityModeEnabled

But Device page doesnt care about that…

 ![image](https://canada1.discourse-cdn.com/flex035/uploads/genieacs/original/2X/f/f08e7df338f36704771a15ea6aee9ccee7dca6fe.png)

> That parameter represent how many SSID we catch up.

InternetGatewayDevice.WIFI.NeighboringWiFiDiagnostic.ResultNumberOfEntries  
currently router catch 42 SSIDs.

> Maybe that’s why ? bc that too much to display that output in Device Page ?

---

<div class="post-metadata">

**Author:** ![Clxxcv](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/clxxcv/32/1013_2.png) [@Clxxcv](https://forum.genieacs.com/u/Clxxcv)\
**Post date:** [January 31, 2023, 6:36am UTC](https://forum.genieacs.com/t/wlan-diagnostic-doesnt-show-up/3483/2 "2023-01-31T06:36:10Z")

</div>

> [@Clxxcv](#):
>
> InternetGatewayDevice.WiFi.NeighboringWiFiDiagnostic.Result

That Strange Thing  
after 1 \> 10 up 19  
then 2 \> 20 up to 29  
and so on …

 ![image](https://canada1.discourse-cdn.com/flex035/uploads/genieacs/original/2X/e/e556eb6c8a32da288ae2905b0f21781a3b5191da.png)

 ![image](https://canada1.discourse-cdn.com/flex035/uploads/genieacs/original/2X/e/ecfe57db7bc87b77aff24aea3994af9c7b9807b0.png)

 ![image](https://canada1.discourse-cdn.com/flex035/uploads/genieacs/original/2X/0/012ffaa56effd49babe200084017c03e74954f5a.png)

---

<div class="post-metadata">

**Author:** ![Clxxcv](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/clxxcv/32/1013_2.png) [@Clxxcv](https://forum.genieacs.com/u/Clxxcv)\
**Post date:** [February 15, 2023, 11:38am UTC](https://forum.genieacs.com/t/wlan-diagnostic-doesnt-show-up/3483/3 "2023-02-15T11:38:11Z")

</div>

I found the issue. it was the syntax. After NeighboringWiFiDiagnostic i Needed just to put RESULT.

```auto
- label: "'Neighbors'"
  parameter: InternetGatewayDevice.WIFI.NeighboringWiFiDiagnostic.Result
  type: "'parameter-table'"
  childParameters:
    - label: "'SSID'"
      parameter: SSID
    - label: "'Channel'"
      parameter: Channel
    - label: "'SignalStrength'"
      parameter: SignalStrength
    - label: "'Mhz Width'"
      parameter: OperatingChannelBandwidth
    - label: "'BeaconPeriod'"
      parameter: BeaconPeriod
    - label: "'SecurityMode'"
      parameter: SecurityModeEnabled

```

Here i get my list of neighbors SSIDs…  
BTW about the box itself that was the SNR ME2-Lite model.

 ![image](https://canada1.discourse-cdn.com/flex035/uploads/genieacs/original/2X/b/bed8c02fd07875d52f446c9c021451facde6f8b2.png)