# Virtual Parameters for WLAN Stations (array?)

**URL:** <https://forum.genieacs.com/t/virtual-parameters-for-wlan-stations-array/6883>\
**Category:** Uncategorized\
**Created:** [May 22, 2025, 7:46pm UTC](https://forum.genieacs.com/t/virtual-parameters-for-wlan-stations-array/6883 "2025-05-22T19:46:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jriera](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/jriera/32/395_2.png) [@jriera](https://forum.genieacs.com/u/jriera)\
**Post date:** [May 22, 2025, 7:46pm UTC](https://forum.genieacs.com/t/virtual-parameters-for-wlan-stations-array/6883/1 "2025-05-22T19:46:41Z")

</div>

Hello,

I need to create a VirtualParameter but with a similar depth structure to the WLAN table of the router (for example) to be able to synchronize the different ONT models according to manufacturer in a single VirtualParameter to list connected devices and to be able to show it in the device view.

For example now:

```auto
- label: "'Clientes asociados a 5Ghz'"
  parameter: InternetGatewayDevice.LANDevice.1.WLANConfiguration.5.AssociatedDevice
  type: "'parameter-table'"
  childParameters:
    - label: "'IP'"
      parameter: AssociatedDeviceIPAddress
    - label: "'Dirección MAC'"
      parameter: AssociatedDeviceMACAddress
    - label: "'Fabricante'"
      parameter: MACVENDOR(AssociatedDeviceMACAddress)
    - label: "'Señal'"
      parameter: X_TRI_AssociatedDeviceRSSI
    - label: "'TX'"
      parameter: LastDataTransmitRate

```

Then have a VirtualParameters that allows something like this:

```auto
VirtualParameters.WLAN5G.1.IP
VirtualParameters.WLAN5G.1.MAC
VirtualParameters.WLAN5G.1.Vendor
VirtualParameters.WLAN5G.1.Signal
VirtualParameters.WLAN5G.1.TXRate
VirtualParameters.WLAN5G.2.IP
VirtualParameters.WLAN5G.2.MAC
VirtualParameters.WLAN5G.2.Vendor
VirtualParameters.WLAN5G.2.Signal
VirtualParameters.WLAN5G.2.TXRate
(...)

```

Is this possible or a VirtualParameter not have depth?

---

<div class="post-metadata">

**Author:** ![akcoder](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/akcoder/32/11_2.png) [@akcoder](https://forum.genieacs.com/u/akcoder)\
**Post date:** [May 27, 2025, 4:19pm UTC](https://forum.genieacs.com/t/virtual-parameters-for-wlan-stations-array/6883/2 "2025-05-27T16:19:16Z")

</div>

Not possible. What you can do is serialize/deserialize JSON and store it in the vparam. I do that for all the CPE diagnostic information (tr143 tests).