# URGENT: TR-069 SSID Update Not Applying on Genexis EARTH-4222 via GenieACS

**URL:** <https://forum.genieacs.com/t/urgent-tr-069-ssid-update-not-applying-on-genexis-earth-4222-via-genieacs/7311>\
**Category:** Help\
**Created:** [January 30, 2026, 2:57pm UTC](https://forum.genieacs.com/t/urgent-tr-069-ssid-update-not-applying-on-genexis-earth-4222-via-genieacs/7311 "2026-01-30T14:57:18Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![ranjit3770](https://avatars.discourse-cdn.com/v4/letter/r/f1d935/32.png) [@ranjit3770](https://forum.genieacs.com/u/ranjit3770)\
**Post date:** [January 30, 2026, 2:57pm UTC](https://forum.genieacs.com/t/urgent-tr-069-ssid-update-not-applying-on-genexis-earth-4222-via-genieacs/7311/1 "2026-01-30T14:57:18Z")

</div>

Dear Experts,

I am requesting urgent technical assistance regarding a TR-069 configuration issue on a Genexis device.

### Device & Platform Details

- **Model:** Genexis EARTH-4222

- **Protocol:** TR-069

- **ACS Platform:** GenieACS v1.2.x

### Objective

I am attempting to programmatically update the **5GHz Wi-Fi SSID name** and **Enable status** on the device using **GenieACS Provisions, Presets, and Tags**.

### Parameter Paths Targeted

- `InternetGatewayDevice.LANDevice.1.WLANConfiguration.1.SSID`

- `InternetGatewayDevice.LANDevice.1.WLANConfiguration.1.Enable`

### Current Workflow & Steps Performed

1. **Provision Script**  
A JavaScript provision was created using `declare()` to:

2. **Preset Trigger**  
A Preset with high priority (Weight: 10000) is configured to trigger the provision when the device is tagged with **APPLY\_5G\_CONFIG**.

3. **API Execution**  
A Python script successfully:

4. **Verification**

### Issue Observed

Despite receiving a **Success** response and the provision completing without errors, the **SSID on the device does not change**.  
It continues to broadcast **“Studio-Connect”**.

### Troubleshooting Already Performed

- Added `commit()` in the Provision script to force flash persistence

- Sent a **reboot task** immediately after setting the SSID

- Used `clear()` to bypass potential ACS database caching

- Performed a **discovery scan** , confirming that  
`WLANConfiguration.1.SSID` currently holds the value **“Studio-Connect”**

- Verified that the device is online and informing correctly

### Questions for Clarification

1. Is there a **firmware-level restriction or lock** on this Genexis EARTH-4222 build that prevents SSID modification via TR-069?

2. Does this model require a **different or proprietary parameter path** , possibly under the `Device.` root instead of `InternetGatewayDevice.`?

3. Are there any **mandatory dependency parameters** (e.g., Security Mode, Passphrase, Radio state) that must be sent in the **same SetParameterValues request** for SSID changes to take effect?

4. Is there a specific **Apply / Commit / Reload parameter** that must be toggled for the configuration to move from RAM to the active radio interface?

### Additional Notes

If required, I can provide:

- A screenshot of the **GenieACS Logs** showing the “Provision Triggered” event

- A screenshot of the **Device Parameters page** confirming the SSID path and value

Based on the above verification, the ACS logic appears to be functioning correctly, and the issue may be related to the **device firmware behavior or TR-069 implementation details specific to the Genexis EARTH-4222**.

I would appreciate your urgent guidance on this matter, as this configuration is required for production rollout.

Thank you for your support.

Kind regards,  
Ranjithkumar Sekar

---

<div class="post-metadata">

**Author:** ![dustin](https://avatars.discourse-cdn.com/v4/letter/d/5daacb/32.png) [@dustin](https://forum.genieacs.com/u/dustin)\
**Post date:** [January 30, 2026, 3:28pm UTC](https://forum.genieacs.com/t/urgent-tr-069-ssid-update-not-applying-on-genexis-earth-4222-via-genieacs/7311/2 "2026-01-30T15:28:55Z")

</div>

Can you set those parameters manually from GenieACS?

---

<div class="post-metadata">

**Author:** ![ranjit3770](https://avatars.discourse-cdn.com/v4/letter/r/f1d935/32.png) [@ranjit3770](https://forum.genieacs.com/u/ranjit3770)\
**Post date:** [January 30, 2026, 4:22pm UTC](https://forum.genieacs.com/t/urgent-tr-069-ssid-update-not-applying-on-genexis-earth-4222-via-genieacs/7311/3 "2026-01-30T16:22:21Z")

</div>

Yes, I am able to set the parameters manually. Using the API, I can create provisions, presets, and tags successfully. However, I am unable to trigger them. Although the API responses return 200 and 202, there are no changes reflected in the UI.

---

<div class="post-metadata">

**Author:** ![mayo1606](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/mayo1606/32/2697_2.png) [@mayo1606](https://forum.genieacs.com/u/mayo1606)\
**Post date:** [February 5, 2026, 2:10pm UTC](https://forum.genieacs.com/t/urgent-tr-069-ssid-update-not-applying-on-genexis-earth-4222-via-genieacs/7311/4 "2026-02-05T14:10:50Z")

</div>

So, can you confirm that if you go to the GenieACS UI, open the device page, and manually edit the parameter there, the change is applied correctly?

If that is the case, it would be helpful if you could share the preset and provision and explain how you are trying to trigger it.

---

<div class="post-metadata">

**Author:** ![ranjit3770](https://avatars.discourse-cdn.com/v4/letter/r/f1d935/32.png) [@ranjit3770](https://forum.genieacs.com/u/ranjit3770)\
**Post date:** [February 7, 2026, 4:08pm UTC](https://forum.genieacs.com/t/urgent-tr-069-ssid-update-not-applying-on-genexis-earth-4222-via-genieacs/7311/5 "2026-02-07T16:08:34Z")

</div>

Hi Mayo1606, thank you so much for your interest in helping me, but I’ve fixed the issue.
