# Two device parameter **URL:** \ **Category:** Uncategorized\ **Created:** [January 27, 2020, 10:24am UTC](https://forum.genieacs.com/t/two-device-parameter/574 "2020-01-27T10:24:16Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![perikopico](https://avatars.discourse-cdn.com/v4/letter/p/7c8e57/32.png) [@perikopico](https://forum.genieacs.com/u/perikopico)\ **Post date:** [January 27, 2020, 10:24am UTC](https://forum.genieacs.com/t/two-device-parameter/574/1 "2020-01-27T10:24:16Z")
Hi. I`m new in genieacs. I install it and it runs okey. But, i have a question. Can i use two differents brands of routers? with different parameters? and, another question, i’m trying to reset the device and this forgets the information. how can i make the router to self-provision with genieacs? ---
**Author:** ![baronkis](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/baronkis/32/161_2.png) [@baronkis](https://forum.genieacs.com/u/baronkis)\ **Post date:** [January 27, 2020, 11:27am UTC](https://forum.genieacs.com/t/two-device-parameter/574/2 "2020-01-27T11:27:13Z")
Hi, your router must by have Connection Request Username and Password fields filled and router firewall do not prohibit TR-069 port 7547 from your ACS server. ---
**Author:** ![akcoder](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/akcoder/32/11_2.png) [@akcoder](https://forum.genieacs.com/u/akcoder)\ **Post date:** [January 27, 2020, 5:24pm UTC](https://forum.genieacs.com/t/two-device-parameter/574/3 "2020-01-27T17:24:41Z")
Yes, you can use multiple brands of routers with the ACS. As to your second question, you would trigger on the 0 BOOTSTRAP event and run your provisioning scripts. ---
**Author:** ![perikopico](https://avatars.discourse-cdn.com/v4/letter/p/7c8e57/32.png) [@perikopico](https://forum.genieacs.com/u/perikopico)\ **Post date:** [February 3, 2020, 6:41pm UTC](https://forum.genieacs.com/t/two-device-parameter/574/4 "2020-02-03T18:41:21Z")
i believed that when te router has connected to genieacs, when i reset it, this automatically recovery stock data. To use several brands, I must have several parameter files or all the data of the different routers go in the same parameter file. Thanks! ---
**Author:** ![perikopico](https://avatars.discourse-cdn.com/v4/letter/p/7c8e57/32.png) [@perikopico](https://forum.genieacs.com/u/perikopico)\ **Post date:** [February 3, 2020, 6:42pm UTC](https://forum.genieacs.com/t/two-device-parameter/574/5 "2020-02-03T18:42:31Z")
The router doesn`t have any problem to connect to genieacs, but, when i push reset button, this forget the information and i need connect to genieacs again. Thanks! ---
**Author:** ![tripout](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/tripout/32/164_2.png) [@tripout](https://forum.genieacs.com/u/tripout)\ **Post date:** [February 3, 2020, 8:08pm UTC](https://forum.genieacs.com/t/two-device-parameter/574/6 "2020-02-03T20:08:09Z")
If you are factory defaulting the device, it does not remember your ACS information. You can try doing DHCP option 43. ---
**Author:** ![perikopico](https://avatars.discourse-cdn.com/v4/letter/p/7c8e57/32.png) [@perikopico](https://forum.genieacs.com/u/perikopico)\ **Post date:** [February 4, 2020, 7:18pm UTC](https://forum.genieacs.com/t/two-device-parameter/574/7 "2020-02-04T19:18:34Z")
can i use this with mikrotik? i’m trying this but i don`t find information. ---
**Author:** ![tripout](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/tripout/32/164_2.png) [@tripout](https://forum.genieacs.com/u/tripout)\ **Post date:** [February 4, 2020, 8:56pm UTC](https://forum.genieacs.com/t/two-device-parameter/574/8 "2020-02-04T20:56:43Z")
As long as the Mikrotik is your DHCP server you can do this. [https://wiki.mikrotik.com/wiki/Manual:IP/DHCP\_Server#DHCP\_Options](https://wiki.mikrotik.com/wiki/Manual:IP/DHCP_Server#DHCP_Options) explains how to setup an DHCP Option ID, you just need to figure it out for Option 43 which seem pretty straight forward if you have Mikrotik knowledge.