# Set DSLite on ZTE **URL:** \ **Category:** Uncategorized\ **Created:** [November 4, 2022, 9:31am UTC](https://forum.genieacs.com/t/set-dslite-on-zte/3166 "2022-11-04T09:31:10Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![egor.gr](https://avatars.discourse-cdn.com/v4/letter/e/7ea924/32.png) [@egor.gr](https://forum.genieacs.com/u/egor.gr)\ **Post date:** [November 4, 2022, 9:31am UTC](https://forum.genieacs.com/t/set-dslite-on-zte/3166/1 "2022-11-04T09:31:10Z")
Hello. I am trying to set dslite settings on ZTE F6600R When there are no dslite settings, dslite search in parameters gives the following information: ```auto InternetGatewayDevice.X_ZTE-COM_DSLITE InternetGatewayDevice.X_ZTE-COM_DSLITE.Enable true InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSettingNumberOfEntries 0 ``` When i setup dslite from web interface on ZTE, i specify only name “dslite” of connection and Interface IPv4 Address to 192.0.0.2 and dslite works. After this on dslite keyword in search i get the following information: ```auto InternetGatewayDevice.X_ZTE-COM_DSLITE InternetGatewayDevice.X_ZTE-COM_DSLITE.Enable true InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting.1 InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting.1.Alias cpe-1 InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting.1.Enable true InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting.1.EndpointAddress 2a00:1000::10 InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting.1.EndpointAddressInUse 2a00:1000::10 InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting.1.EndpointAddressTypePrecedence FQDN InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting.1.EndpointAssignmentPrecedence DHCPv6 InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting.1.EndpointName aftr.domain.com InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting.1.LowIFID InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting.1.Name dslite InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting.1.Origin DHCPv6 InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting.1.Status Enabled InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting.1.TunnelInterface 192.0.0.2 InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting.1.TunneledInterface InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.4 InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSettingNumberOfEntries 1 ``` So i made a declare query ```auto declare('InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting.*.[Enable:true,Name:"dslite",TunnelInterface:"192.0.0.2"]',null,{path:1}); ``` Deleted dslite instanse that i created manually from web but after acs to zte query no dslite settings were made. I also tried ```auto declare('InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting.[Enable:true,Name:"dslite",TunnelInterface:"192.0.0.2"]',null,{path:1}); ``` Without ‘\*’ but also no result. ACS logs: ```auto 2022-11-04T11:15:46.858Z [INFO] ::ffff:100.127.50.244 B08B92-F6600R-ZTEEQLYN5C00002: Script: Set Internet service 2022-11-04T11:15:46.858Z [INFO] ::ffff:100.127.50.244 B08B92-F6600R-ZTEEQLYN5C00002: Script: Set DSLITE 2022-11-04T11:15:46.858Z [INFO] ::ffff:100.127.50.244 B08B92-F6600R-ZTEEQLYN5C00002: Script: ZTEEQLYN5C00002 Set Provision tag to done 2022-11-04T11:15:46.858Z [INFO] ::ffff:100.127.50.244 B08B92-F6600R-ZTEEQLYN5C00002: Script: ZTEEQLYN5C00002 Provisioning ONU 2022-11-04T11:15:46.872Z [INFO] ::ffff:100.127.50.244 B08B92-F6600R-ZTEEQLYN5C00002: ACS request; acsRequestId="184425aa1e10000" acsRequestName="AddObject" 2022-11-04T11:15:46.890Z [WARN] ::ffff:100.127.50.244 B08B92-F6600R-ZTEEQLYN5C00002: CPE fault; acsRequestId="184425aa1e10000" cpeFaultCode="9002" cpeFaultString="Internal error" 2022-11-04T11:15:46.891Z [WARN] ::ffff:100.127.50.244 B08B92-F6600R-ZTEEQLYN5C00002: Channel has faulted; channel="bootstrap" retries=0 faultCode="cwmp.9002" faultMessage="Internal error" 2022-11-04T11:15:46.891Z [WARN] ::ffff:100.127.50.244 B08B92-F6600R-ZTEEQLYN5C00002: Channel has faulted; channel="default" retries=0 faultCode="cwmp.9002" faultMessage="Internal error" 2022-11-04T11:15:46.921Z [INFO] ::ffff:100.127.50.244 B08B92-F6600R-ZTEEQLYN5C00002: Script: ZTEEQLYN5C00002 ONU already provisioned ``` The only fault from web gui is ```auto faultCode: "9003" faultString: Invalid arguments setParameterValuesFault: - parameterName: InternetGatewayDevice.ManagementServer.PeriodicInformTime faultCode: "9007" faultString: Invalid parameter value ``` Maybe someone had success with setting dslite on ZTE? ---
**Author:** ![akcoder](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/akcoder/32/11_2.png) [@akcoder](https://forum.genieacs.com/u/akcoder)\ **Post date:** [November 4, 2022, 5:12pm UTC](https://forum.genieacs.com/t/set-dslite-on-zte/3166/2 "2022-11-04T17:12:32Z")
> [@egor.gr](#): > > ```auto > declare('InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting.*.[Enable:true,Name:"dslite",TunnelInterface:"192.0.0.2"]',null,{path:1}); > > ``` Your syntax is incorrect. Try this: ```auto declare('InternetGatewayDevice.X_ZTE-COM_DSLITE.InterfaceSetting.[Enable:true,Name:dslite,TunnelInterface:192.0.0.2]', {path: 1}, {path:1}); ``` ---
**Author:** ![egor.gr](https://avatars.discourse-cdn.com/v4/letter/e/7ea924/32.png) [@egor.gr](https://forum.genieacs.com/u/egor.gr)\ **Post date:** [November 7, 2022, 8:21am UTC](https://forum.genieacs.com/t/set-dslite-on-zte/3166/3 "2022-11-07T08:21:28Z")
> [@egor.gr](#): > > `null,{path:1}` Strange, but the only error now is ```auto faultCode: "9002" faultString: Internal error setParameterValuesFault: null ``` dslite still remains unconfigured What dows error 9002 means? ---
**Author:** ![egor.gr](https://avatars.discourse-cdn.com/v4/letter/e/7ea924/32.png) [@egor.gr](https://forum.genieacs.com/u/egor.gr)\ **Post date:** [November 7, 2022, 11:44am UTC](https://forum.genieacs.com/t/set-dslite-on-zte/3166/4 "2022-11-07T11:44:34Z")
It seems that issue was in copy-paste of backup codes 🙂 However, all works, dslite works, but i keep getting 9002 error in the logs. I set cwmp.datetimeMilliseconds to false, restarted cwmp service but no luck. However, if i remove from my code declare statement that creates wanip connection-this error disappears. When genie exetutes wanip creation from script i see in the logs ```auto ACS request; acsRequestId="1845240c90f002f" acsRequestName="AddObject" 2022-11-07T13:21:31.969Z [WARN] ::ffff:100.127.50.244 B08B92-F6600R-ZTEEQLYN5C00002: CPE fault; acsRequestId="1845240c90f002f" cpeFaultCode="9002" cpeFaultString="Internal error" 2022-11-07T13:21:31.970Z [WARN] ::ffff:100.127.50.244 B08B92-F6600R-ZTEEQLYN5C00002: Channel has faulted; channel="inform" retries=0 faultCode="cwmp.9002" faultMessage="Internal error" 2022-11-07T13:21:31.970Z [WARN] ::ffff:100.127.50.244 B08B92-F6600R-ZTEEQLYN5C00002: Channel has faulted; channel="default" retries=0 faultCode="cwmp.9002" faultMessage="Internal error" ``` However, when it comes to dslite-there are no warns or errors. Log during dslite configuration ```auto ACS request; acsRequestId="1845240c90f0102" acsRequestName="AddObject" 2022-11-07T13:21:32.204Z [INFO] ::ffff:100.127.50.244 B08B92-F6600R-ZTEEQLYN5C00002: ACS request; acsRequestId="1845240c90f0103" acsRequestName="GetParameterValues" 2022-11-07T13:21:32.232Z [INFO] ::ffff:100.127.50.244 B08B92-F6600R-ZTEEQLYN5C00002: ACS request; acsRequestId="1845240c90f0104" acsRequestName="SetParameterValues" 2022-11-07T13:21:32.305Z [INFO] ::ffff:100.127.50.244 B08B92-F6600R-ZTEEQLYN5C00002: ACS request; acsRequestId="1845240c90f0105" acsRequestName="GetParameterNames" 2022-11-07T13:21:32.325Z [INFO] ::ffff:100.127.50.244 B08B92-F6600R-ZTEEQLYN5C00002: ACS request; acsRequestId="1845240c90f0106" acsRequestName="SetParameterValues" ``` I was just thinking maybe there is an issue in declaring wanip configuration… But strange is that wanip connection is created in result. Declare statement: ```auto declare('InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.[AddressingType:DHCP,ConnectionType:IP_Routed,DNSEnabled:true,Enable:true,NATEnabled:false,Name:OMDData,X_ZTE-COM_8021P:6,X_ZTE-COM_Dhcpv6IANAEnable:true,X_ZTE-COM_Dhcpv6IAPDEnable:true,X_ZTE-COM_IPMode:IPv6,X_ZTE-COM_IPv6AcquireMode:Auto,X_ZTE-COM_PDGUAEnable:true,X_ZTE-COM_ServiceList:INTERNET,X_ZTE-COM_SlaacEnable:true,X_ZTE-COM_Unnumbered:false,X_ZTE-COM_VLANEnable:true,X_ZTE-COM_VLANID:6]',{path:1},{path:4}); ``` ---
**Author:** ![akcoder](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/akcoder/32/11_2.png) [@akcoder](https://forum.genieacs.com/u/akcoder)\ **Post date:** [November 7, 2022, 8:16pm UTC](https://forum.genieacs.com/t/set-dslite-on-zte/3166/5 "2022-11-07T20:16:01Z")
> [@egor.gr](#): > > 9002 9000 series errors are CPE errors. You will need to review the logs on your device.