# Pushing configration to CPE

**URL:** <https://forum.genieacs.com/t/pushing-configration-to-cpe/394>\
**Category:** Uncategorized\
**Created:** [October 28, 2019, 10:15am UTC](https://forum.genieacs.com/t/pushing-configration-to-cpe/394 "2019-10-28T10:15:36Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mbaik](https://avatars.discourse-cdn.com/v4/letter/m/9fc348/32.png) [@mbaik](https://forum.genieacs.com/u/mbaik)\
**Post date:** [October 28, 2019, 10:15am UTC](https://forum.genieacs.com/t/pushing-configration-to-cpe/394/1 "2019-10-28T10:15:36Z")

</div>

Dears,

I have installed genieacs and communicated it with my ZHONE router and I have modified the index of the parameter and the devices was showing probably and everything is fine,

Now I’m trying to send the configuration once the CPE device set to default,  
Please if anyone have a procedure to share it,

 ![image](https://canada1.discourse-cdn.com/flex035/uploads/genieacs/original/1X/22bb7b33d1b11366d9c7efc403c8939191018d89.png)

Regards,  
Moumen Al Baik

---

<div class="post-metadata">

**Author:** ![zaidka](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/zaidka/32/9_2.png) [@zaidka](https://forum.genieacs.com/u/zaidka)\
**Post date:** [October 31, 2019, 5:41am UTC](https://forum.genieacs.com/t/pushing-configration-to-cpe/394/2 "2019-10-31T05:41:38Z")

</div>

You’ll need to create a Provision preset that’s triggered on “0 BOOTSTRAP” event. Read about provisions here: [https://github.com/genieacs/genieacs/wiki/Provisions](https://github.com/genieacs/genieacs/wiki/Provisions)