# Periodic Inform Time

**URL:** <https://forum.genieacs.com/t/periodic-inform-time/803>\
**Category:** Uncategorized\
**Created:** [May 28, 2020, 11:55am UTC](https://forum.genieacs.com/t/periodic-inform-time/803 "2020-05-28T11:55:17Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![PHUGeckonet](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/phugeckonet/32/236_2.png) [@PHUGeckonet](https://forum.genieacs.com/u/PHUGeckonet)\
**Post date:** [May 28, 2020, 11:55am UTC](https://forum.genieacs.com/t/periodic-inform-time/803/1 "2020-05-28T11:55:17Z")

</div>

Hello,

i have a strange error on Genie beta 1.2.0 with ZTE devices:  
faultCode: “9003”  
faultString: Invalid arguments  
setParameterValuesFault:

- parameterName: InternetGatewayDevice.ManagementServer.PeriodicInformTime  
faultCode: “9007”  
faultString: Invalid parameter value

Does someone has similar issue?

---

<div class="post-metadata">

**Author:** ![lavira](https://avatars.discourse-cdn.com/v4/letter/l/87869e/32.png) [@lavira](https://forum.genieacs.com/u/lavira)\
**Post date:** [May 28, 2020, 12:06pm UTC](https://forum.genieacs.com/t/periodic-inform-time/803/2 "2020-05-28T12:06:39Z")

</div>

Hello, I think you are trying to set this parameter with a wrong format … but usually you don’t really need to set this parameter and It’s enough to enable periodic informs and set the inform interval:  
InternetGatewayDevice.ManagementServer.PeriodicInformEnable: true  
InternetGatewayDevice.ManagementServer.PeriodicInformInterval: no of seconds

To also set the PeriodicInformTime, try with the following format:  
2020-05-28T16:00:05 or 2020-05-28T16:00:05.123456

---

<div class="post-metadata">

**Author:** ![PHUGeckonet](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/phugeckonet/32/236_2.png) [@PHUGeckonet](https://forum.genieacs.com/u/PHUGeckonet)\
**Post date:** [May 28, 2020, 12:09pm UTC](https://forum.genieacs.com/t/periodic-inform-time/803/3 "2020-05-28T12:09:58Z")

</div>

Thank you for reply i don’t set this parameter in my script the error occurred for example when i summon device or try to refresh some of parameters.

---

<div class="post-metadata">

**Author:** ![lavira](https://avatars.discourse-cdn.com/v4/letter/l/87869e/32.png) [@lavira](https://forum.genieacs.com/u/lavira)\
**Post date:** [May 28, 2020, 12:15pm UTC](https://forum.genieacs.com/t/periodic-inform-time/803/4 "2020-05-28T12:15:06Z")

</div>

You must have a preset (maybe with a provision script attached) that is trying to set this parameters. When you find the line, comment it or update the format and the error will go away.

---

<div class="post-metadata">

**Author:** ![PHUGeckonet](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/phugeckonet/32/236_2.png) [@PHUGeckonet](https://forum.genieacs.com/u/PHUGeckonet)\
**Post date:** [May 28, 2020, 12:31pm UTC](https://forum.genieacs.com/t/periodic-inform-time/803/5 "2020-05-28T12:31:54Z")

</div>

I have found it, thank you for help.

---

<div class="post-metadata">

**Author:** ![dadejumo](https://avatars.discourse-cdn.com/v4/letter/d/8c91f0/32.png) [@dadejumo](https://forum.genieacs.com/u/dadejumo)\
**Post date:** [August 11, 2020, 5:39pm UTC](https://forum.genieacs.com/t/periodic-inform-time/803/6 "2020-08-11T17:39:56Z")

</div>

I have the same issue , where did you make this change?

---

<div class="post-metadata">

**Author:** ![PHUGeckonet](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/phugeckonet/32/236_2.png) [@PHUGeckonet](https://forum.genieacs.com/u/PHUGeckonet)\
**Post date:** [August 12, 2020, 6:32am UTC](https://forum.genieacs.com/t/periodic-inform-time/803/7 "2020-08-12T06:32:28Z")

</div>

After installation there are some default provisions i just remove them.