# Multiple asterisk wildcard parameter problem

**URL:** <https://forum.genieacs.com/t/multiple-asterisk-wildcard-parameter-problem/7210>\
**Category:** Uncategorized\
**Created:** [October 22, 2025, 1:28am UTC](https://forum.genieacs.com/t/multiple-asterisk-wildcard-parameter-problem/7210 "2025-10-22T01:28:04Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![chenchih](https://avatars.discourse-cdn.com/v4/letter/c/f9ae1b/32.png) [@chenchih](https://forum.genieacs.com/u/chenchih)\
**Post date:** [October 22, 2025, 1:28am UTC](https://forum.genieacs.com/t/multiple-asterisk-wildcard-parameter-problem/7210/1 "2025-10-22T01:28:04Z")

</div>

Does it support render multiply asterisk path like below, or it’s a limitation.

If i was to capture like below case

```auto
"Device.WiFi.Data.Network.Device.1.Radio.1.BSS.1.SSID" : "test-1", "Device.WiFi.Data.Network.Device.1.Radio.2.BSS.1.SSID" : "test-2"

```

If i add this into devices page

`Device.WiFi.Data.Network.Device.*.Radio.*BSS.*.SSID`

it will not be able to render result when i add multiple asterisk

```auto
- element: "'div'"
  type: "'container'"
  components:
    - element: "'h3'"
      type: "'container'"
      components:
        - "'Wi-Fi Data SSID'"
        - label: "'Summon'"
          type: "'summon-button'"
          parameters:
			- Device.WiFi.Data.Network.Device.*.Radio.*.BSS.*.SSID
- parameter: WiFi.Data.Network.Device.*.Radio.*.BSS.*.SSID
  type: "'parameter-table'"
  childParameters:
    - label: "'SSID'"
      parameter: SSID

```

but if i use single asterisk it’s able to render properly

```auto
.....
parameters:
  - Device.WiFi.Data.Network.Device.*.ID
- parameter: Device.WiFi.Data.Network.Device
  type: "'parameter-table'"
  childParameters:
    - label: "'ID'"
      parameter: ID

```

do any one have any idea to solve this , else i have to assign a fixed path.