# Huawei HG8546M Integration

**URL:** <https://forum.genieacs.com/t/huawei-hg8546m-integration/5232>\
**Category:** Uncategorized\
**Created:** [March 25, 2024, 10:40pm UTC](https://forum.genieacs.com/t/huawei-hg8546m-integration/5232 "2024-03-25T22:40:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Flashew](https://avatars.discourse-cdn.com/v4/letter/f/b38774/32.png) [@Flashew](https://forum.genieacs.com/u/Flashew)\
**Post date:** [March 25, 2024, 10:40pm UTC](https://forum.genieacs.com/t/huawei-hg8546m-integration/5232/1 "2024-03-25T22:40:09Z")

</div>

I am trying to connect a Huawei HG8546M device and I cannot find documentation to be able to do this. It just doesn’t connect.  
Configure within the ACS device URL: ip:7547, ACS User Name, ACS Password, Connection Request User Name and Connection Request Password with “admin”. I configured the last parameters like this since in Genie within config I created cwmp.auth and cwmp.connectionRequestAuth with the parameter AUTH(“admin”, “admin”).  
I would appreciate your help.

---

<div class="post-metadata">

**Author:** ![Figaro](https://avatars.discourse-cdn.com/v4/letter/f/ea666f/32.png) [@Figaro](https://forum.genieacs.com/u/Figaro)\
**Post date:** [April 23, 2024, 4:25pm UTC](https://forum.genieacs.com/t/huawei-hg8546m-integration/5232/2 "2024-04-23T16:25:58Z")

</div>

Hi. In the GenieACS config try removing the “cwmp.auth”, leaving only “cwmp.connectionRequestAuth”.  
Check on the OLT side that the “ont-lineprofile” has TR069 enabled if your WAN is provisioned from the OLT.  
Check that the connection on your ONT has TR069 in the service section:  
 ![image](https://canada1.discourse-cdn.com/flex035/uploads/genieacs/original/2X/6/6addbabf56ddd6a70e5aa9bc0e6fdd1e1e551165.png)  
In “Service Type” the option selected is “Internet + TR069” or “TR069” if this is a TR069 exclusive WAN