# GenieACS default parameters

**URL:** <https://forum.genieacs.com/t/genieacs-default-parameters/3442>\
**Category:** Uncategorized\
**Created:** [January 19, 2023, 12:35am UTC](https://forum.genieacs.com/t/genieacs-default-parameters/3442 "2023-01-19T00:35:02Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![zolitacs](https://avatars.discourse-cdn.com/v4/letter/z/7ba0ec/32.png) [@zolitacs](https://forum.genieacs.com/u/zolitacs)\
**Post date:** [January 19, 2023, 12:35am UTC](https://forum.genieacs.com/t/genieacs-default-parameters/3442/1 "2023-01-19T00:35:02Z")

</div>

Hello!

How can I change which parameters GeniACS 1.2.9 should query automatically?

---

<div class="post-metadata">

**Author:** ![RIsset](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/risset/32/1075_2.png) [@RIsset](https://forum.genieacs.com/u/RIsset)\
**Post date:** [January 19, 2023, 12:46pm UTC](https://forum.genieacs.com/t/genieacs-default-parameters/3442/2 "2023-01-19T12:46:38Z")

</div>

Hey,

If I understand your question correctly you want to change which parameters GenieAcs refreshes/updates “automatically”.

If you look at your provisions there should be one named “default”. This provision already has some parameters that are refreshed hourly. Here you can add more.

---

<div class="post-metadata">

**Author:** ![zolitacs](https://avatars.discourse-cdn.com/v4/letter/z/7ba0ec/32.png) [@zolitacs](https://forum.genieacs.com/u/zolitacs)\
**Post date:** [January 19, 2023, 2:24pm UTC](https://forum.genieacs.com/t/genieacs-default-parameters/3442/3 "2023-01-19T14:24:11Z")

</div>

I found it, thanks for the help.  
Actually, I need to be able to manage NATed devices.  
I installed the https:// github. com/jselbie/stunserver STUN server, run it with the following command: ./stunserver --primaryinterface ens18 --reuseaddr  
This part works, but I still can’t configure the devices because GenieACS is trying to access them via the WAN ip address.  
In GenieACS, I set the cwmp.udpConnectionRequestPort 3478 parameter on the admin/config page.  
I was able to read the InternetGatewayDevice.ManagementServer.UDPConnectionRequestAddress parameter, but GenieACS still tries to reach remote clients on the WAN ip address.