# Genie 1.2.3 MikroTik devices detected, how to update the table header?

**URL:** <https://forum.genieacs.com/t/genie-1-2-3-mikrotik-devices-detected-how-to-update-the-table-header/1407>\
**Category:** Uncategorized\
**Created:** [January 30, 2021, 5:16am UTC](https://forum.genieacs.com/t/genie-1-2-3-mikrotik-devices-detected-how-to-update-the-table-header/1407 "2021-01-30T05:16:26Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![prawira](https://avatars.discourse-cdn.com/v4/letter/p/258eb7/32.png) [@prawira](https://forum.genieacs.com/u/prawira)\
**Post date:** [January 30, 2021, 5:16am UTC](https://forum.genieacs.com/t/genie-1-2-3-mikrotik-devices-detected-how-to-update-the-table-header/1407/1 "2021-01-30T05:16:27Z")

</div>

hi all,

i success to install genieacs 1.2.3 and it can detect all mikrotik devices connected.

 ![devices](https://canada1.discourse-cdn.com/flex035/uploads/genieacs/original/1X/e7fca8500c444f0a68bd00baf58250dfe316c2fd.png)

but it does not shows the devices identity, software version installed and ip address.

which files should be altered for the above needs ?

thank you

Paul

---

<div class="post-metadata">

**Author:** ![webtron](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/webtron/32/396_2.png) [@webtron](https://forum.genieacs.com/u/webtron)\
**Post date:** [January 30, 2021, 11:06pm UTC](https://forum.genieacs.com/t/genie-1-2-3-mikrotik-devices-detected-how-to-update-the-table-header/1407/2 "2021-01-30T23:06:36Z")

</div>

Go to Admin then Config down on left. Buttons at the bottom “edit index page” “edit device page”. Copy and paste the contents out of them as a backup. Then  
Device page [setting up TR096 with GenieACS for MikroTik Devices · GitHub](https://gist.github.com/bile0026/9235b8ec797b08fdd75e4766bbaa41bc)  
Index page [Setting up TR069 with GenieACS for MikroTik Devices. · GitHub](https://gist.github.com/bile0026/bffca705b0cfa9833cedec662d9dfe17)  
I haven’t tried these but they look correct.

---

<div class="post-metadata">

**Author:** ![prawira](https://avatars.discourse-cdn.com/v4/letter/p/258eb7/32.png) [@prawira](https://forum.genieacs.com/u/prawira)\
**Post date:** [January 31, 2021, 1:09am UTC](https://forum.genieacs.com/t/genie-1-2-3-mikrotik-devices-detected-how-to-update-the-table-header/1407/3 "2021-01-31T01:09:21Z")

</div>

thank you webtron,

here is my edited devices index page. I am not using 100% from that link.

 ![genie123 devicepage mt](https://canada1.discourse-cdn.com/flex035/uploads/genieacs/original/1X/c2fe5e0f0d07d57c436ab2bfcebeadc21fb720f1.png)

I have to add the parameter `cwmp.deviceOnlineThreshold = 10000` as well as i got “No contact from device” messages from the devices when summon clicked.

Anyway, as i am using different / custom both Index Page and Device Page than i will not be able get the information from other devices such as ONT Huawei and ZTE. I have to use another machine for that purpose. Am I right ? CMIIW.

Thank you.

Paul

---

<div class="post-metadata">

**Author:** ![prawira](https://avatars.discourse-cdn.com/v4/letter/p/258eb7/32.png) [@prawira](https://forum.genieacs.com/u/prawira)\
**Post date:** [February 10, 2021, 7:06am UTC](https://forum.genieacs.com/t/genie-1-2-3-mikrotik-devices-detected-how-to-update-the-table-header/1407/4 "2021-02-10T07:06:20Z")

</div>

hi all,

i found some parameters does not work on device page so i do some modification become as follow:  
``

`
`
`
type: “‘tags’”
type: “‘ping’”
type: “‘parameter-list’”
parameters:

element: “‘span.inform’”
label: “‘Last inform’”
parameter: DATE_STRING(Events.Inform)
type: “‘container’”
components:

type: “‘parameter’”
chart: “‘online’”
type: “‘overview-dot’”
type: “‘summon-button’”
parameters:

Device.DeviceInfo.X_MIKROTIK_SystemIdentity
Device.DeviceInfo.Description
Device.DeviceInfo.ManufacturerOUI
Device.DeviceInfo.HardwareVersion
Device.DeviceInfo.ProductClass
Device.DeviceInfo.ModelName
Device.DeviceInfo.SerialNumber
Device.Ethernet.Interface.1.MACAddress
Device.WiFi.SSID.1.MACAddress
Device.DeviceInfo.SoftwareVersion
Device.DeviceInfo.UpTime
Device.DHCPv4.Client.1.IPAddress
Device.IP.Interface.1.IPv4Address.1.IPAddress
Device.WiFi.SSID.1.SSID
Device.WiFi.AccessPoint.1.AssociatedDeviceNumberOfEntries
Device.WiFi.SSID.2.SSID
Device.WiFi.AccessPoint.2.AssociatedDeviceNumberOfEntries
Device.DeviceInfo.X_MIKROTIK_ArchName
Device.WiFi.AccessPoint.1.AssociatedDevice
Device.Hosts.Host

label: “‘Manufacturer’”
parameter: DeviceID.Manufacturer
label: “‘Description’”
parameter: Device.DeviceInfo.Description
label: “‘OUI’”
parameter: Device.DeviceInfo.ManufacturerOUI
label: “‘Hardware version’”
parameter: Device.DeviceInfo.HardwareVersion
label: “‘Product class’”
parameter: Device.DeviceInfo.ProductClass
label: “‘Model Name’”
parameter: Device.DeviceInfo.ModelName
label: “‘Serial number’”
parameter: DeviceID.SerialNumber
label: “‘Ethernet 1 MAC’”
parameter: Device.Ethernet.Interface.1.MACAddress
label: “‘Wireless 1 MAC’”
parameter: Device.WiFi.SSID.1.MACAddress
label: “‘Software version’”
parameter: Device.DeviceInfo.SoftwareVersion
label: “‘UP Time’”
parameter: Device.DeviceInfo.UpTime
label: “‘IDENT’”
parameter: Device.DeviceInfo.X_MIKROTIK_SystemIdentity
label: “‘IP’”
parameter: Device.IP.Interface.1.IPv4Address.1.IPAddress
label: “‘WLAN SSID’”
parameter: Device.WiFi.SSID.1.SSID
label: “‘WLAN passphrase’”
parameter: Device.LANDevice.1.WLANConfiguration.1.KeyPassphrase

label: “‘WLAN hosts’”
parameter: Device.WiFi.AccessPoint.1.AssociatedDevice
type: “‘parameter-table’”
childParameters:

label: “‘MAC address’”
parameter: MACAddress
label: “‘Signal’”
parameter: SignalStrength
label: “‘SNR’”
parameter: X_MIKROTIK_Stats.SignalToNoise
label: “‘Rx Packet’”
parameter: Stats.PacketsReceived
label: “‘Tx Packet’”
parameter: Stats.PacketsSent
label: “‘Rx Byte’”
parameter: Stats.BytesReceived
label: “‘Tx Byte’”
parameter: Stats.BytesSent
label: “‘Rx CCQ’”
parameter: X_MIKROTIK_Stats.RxCCQ
label: “‘Tx CCQ’”
parameter: X_MIKROTIK_Stats.TxCCQ
label: “‘Rx Frame’”
parameter: X_MIKROTIK_Stats.RxFrames
label: “‘Tx Frame’”
parameter: X_MIKROTIK_Stats.TxFrames
label: “‘HwRx Frame’”
parameter: X_MIKROTIK_Stats.RxHwFrames
label: “‘HwTx Frame’”
parameter: X_MIKROTIK_Stats.TxHwFrames
label: “‘Rx FrameByte’”
parameter: X_MIKROTIK_Stats.RxFrameBytes
label: “‘Tx FrameByte’”
parameter: X_MIKROTIK_Stats.TxFrameBytes
label: “‘HwRx FrameByte’”
parameter: X_MIKROTIK_Stats.RxHwFrameBytes
label: “‘HwTx FrameByte’”
parameter: X_MIKROTIK_Stats.TxHwFrameBytes

label: “‘DHCP hosts’”
parameter: Device.Hosts.Host
type: “‘parameter-table’”
childParameters:

label: “‘IP address’”
parameter: IPAddress
label: “‘MAC address’”
parameter: PhysAddress
label: “‘Host name’”
parameter: HostName
label: “‘Interface’”
parameter: Layer1Interface

element: “‘div’”
type: “‘container’”
components:

element: “‘h3’”
type: “‘container’”
components:

“‘Faults’”

type: “‘device-faults’”

element: “‘div.container-full-width’”
type: “‘container’”
components:

element: “‘h3’”
type: “‘container’”
components:

“‘All parameters’”

type: “‘all-parameters’”

`- `type: “‘device-actions’”
`

the result like the following picture:

 ![new device page](https://canada1.discourse-cdn.com/flex035/uploads/genieacs/original/1X/20993943ea89de33a0892da1313900f37767a4a6.png)

any advice will be appricated

Thank you

Paul

---

<div class="post-metadata">

**Author:** ![Helloke](https://avatars.discourse-cdn.com/v4/letter/h/fbc32d/32.png) [@Helloke](https://forum.genieacs.com/u/Helloke)\
**Post date:** [August 29, 2024, 7:30pm UTC](https://forum.genieacs.com/t/genie-1-2-3-mikrotik-devices-detected-how-to-update-the-table-header/1407/5 "2024-08-29T19:30:57Z")

</div>

can you share it in Proper format , this format is not accept by GenieACS

---

<div class="post-metadata">

**Author:** ![Helloke](https://avatars.discourse-cdn.com/v4/letter/h/fbc32d/32.png) [@Helloke](https://forum.genieacs.com/u/Helloke)\
**Post date:** [August 30, 2024, 9:03am UTC](https://forum.genieacs.com/t/genie-1-2-3-mikrotik-devices-detected-how-to-update-the-table-header/1407/6 "2024-08-30T09:03:05Z")

</div>

> [@prawira](#):
>
> cwmp.deviceOnlineThreshold = 10000

how to add this ?