# Disable WIFI to ONT Huawei HG8145v5 **URL:** \ **Category:** Uncategorized\ **Created:** [March 6, 2023, 2:37pm UTC](https://forum.genieacs.com/t/disable-wifi-to-ont-huawei-hg8145v5/3630 "2023-03-06T14:37:21Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Lorenzo](https://avatars.discourse-cdn.com/v4/letter/l/4da419/32.png) [@Lorenzo](https://forum.genieacs.com/u/Lorenzo)\ **Post date:** [March 6, 2023, 2:37pm UTC](https://forum.genieacs.com/t/disable-wifi-to-ont-huawei-hg8145v5/3630/1 "2023-03-06T14:37:21Z")
Hello everyone!! I am new to the world of provisioning with GenieACS, so I would like to know what parameters I could use to disable the WIFI of the Huawei ONT HG8145v5? I plan to use a preset with the following: declare(“InternetGatewayDevice.LANDevice.1.WLANConfiguration.Disable”, {value: now}); My question is if it would work?, or what could I do?, thanks for any help ---
**Author:** ![rudymartin](https://avatars.discourse-cdn.com/v4/letter/r/919ad9/32.png) [@rudymartin](https://forum.genieacs.com/u/rudymartin)\ **Post date:** [March 6, 2023, 4:31pm UTC](https://forum.genieacs.com/t/disable-wifi-to-ont-huawei-hg8145v5/3630/2 "2023-03-06T16:31:11Z")
> [@Lorenzo](#): > > InternetGatewayDevice.LANDevice.1.WLANConfiguration.Disable what have you tried so far? where did you get that value? [Enable](https://cwmp-data-models.broadband-forum.org/tr-069-1-0-0.html#D.InternetGatewayDevice:1.InternetGatewayDevice.LANDevice.%7Bi%7D.WLANConfiguration.%7Bi%7D.) ---
**Author:** ![Lorenzo](https://avatars.discourse-cdn.com/v4/letter/l/4da419/32.png) [@Lorenzo](https://forum.genieacs.com/u/Lorenzo)\ **Post date:** [March 6, 2023, 4:46pm UTC](https://forum.genieacs.com/t/disable-wifi-to-ont-huawei-hg8145v5/3630/3 "2023-03-06T16:46:47Z")
[https://forum.genieacs.com/t/refresh-all-wlanconfiguration-subnodes/2406](https://forum.genieacs.com/t/refresh-all-wlanconfiguration-subnodes/2406) I was looking at different provisions made in the forum, and I found this one, where they use the command: declare(“InternetGatewayDevice.LANDevice.1.WLANConfiguration.1.SSID”, {value: now}); , to read the SSID of the WIFI, right?, so I figured that the way I did it, I could disable the WIFI ---
**Author:** ![Lorenzo](https://avatars.discourse-cdn.com/v4/letter/l/4da419/32.png) [@Lorenzo](https://forum.genieacs.com/u/Lorenzo)\ **Post date:** [March 6, 2023, 4:50pm UTC](https://forum.genieacs.com/t/disable-wifi-to-ont-huawei-hg8145v5/3630/4 "2023-03-06T16:50:39Z")
> [@rudymartin](#): > > > [@Lorenzo](#): > > > > InternetGatewayDevice.LANDevice.1.WLANConfiguration.Disable > > what have you tried so far? where did you get that value? > > [Enable](https://cwmp-data-models.broadband-forum.org/tr-069-1-0-0.html#D.InternetGatewayDevice:1.InternetGatewayDevice.LANDevice.%7Bi%7D.WLANConfiguration.%7Bi%7D.) Could you then put “Enable” instead of “Disable”, and assign it the value “false”, so that in this way it disables the WIFI? ---
**Author:** ![akcoder](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/akcoder/32/11_2.png) [@akcoder](https://forum.genieacs.com/u/akcoder)\ **Post date:** [March 6, 2023, 8:56pm UTC](https://forum.genieacs.com/t/disable-wifi-to-ont-huawei-hg8145v5/3630/5 "2023-03-06T20:56:00Z")
> [@Lorenzo](#): > > declare(“InternetGatewayDevice.LANDevice.1.WLANConfiguration.Disable”, {value: now}); Two things. First, this does not set the value, only refresh it. Second, That is not a valid parameter name. [You should review the specification](https://cwmp-data-models.broadband-forum.org/tr-069-1-0-0.html#D.InternetGatewayDevice:1.InternetGatewayDevice.LANDevice.%7Bi%7D.WLANConfiguration.%7Bi%7D.Enable)… ---
**Author:** ![Lorenzo](https://avatars.discourse-cdn.com/v4/letter/l/4da419/32.png) [@Lorenzo](https://forum.genieacs.com/u/Lorenzo)\ **Post date:** [March 6, 2023, 9:04pm UTC](https://forum.genieacs.com/t/disable-wifi-to-ont-huawei-hg8145v5/3630/6 "2023-03-06T21:04:20Z")
> [@akcoder](#): > > Second, That is not a valid parameter name. [You should review the specification](https://cwmp-data-models.broadband-forum.org/tr-069-1-0-0.html#D.InternetGatewayDevice:1.InternetGatewayDevice.LANDevice.%7Bi%7D.WLANConfiguration.%7Bi%7D.Enable)… Thanks for your answer, looking at the specs I could assume that using: declare(“InternetGatewayDevice.LANDevice.1.WLANConfiguration.Enable”, {value: now}, {value: false}); It would work, what do you think? do you have any example? thanks @akcoder ---
**Author:** ![mtarifa](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/mtarifa/32/848_2.png) [@mtarifa](https://forum.genieacs.com/u/mtarifa)\ **Post date:** [March 8, 2023, 2:16am UTC](https://forum.genieacs.com/t/disable-wifi-to-ont-huawei-hg8145v5/3630/7 "2023-03-08T02:16:23Z")
may be InternetGatewayDevice.LANDevice.1.WLANConfiguration.1.RadioEnabled and InternetGatewayDevice.LANDevice.1.WLANConfiguration.5.RadioEnabled to false At least for HG8247Q it works. ---
**Author:** ![Lorenzo](https://avatars.discourse-cdn.com/v4/letter/l/4da419/32.png) [@Lorenzo](https://forum.genieacs.com/u/Lorenzo)\ **Post date:** [March 8, 2023, 2:56pm UTC](https://forum.genieacs.com/t/disable-wifi-to-ont-huawei-hg8145v5/3630/8 "2023-03-08T14:56:55Z")
> [@mtarifa](#): > > may be InternetGatewayDevice.LANDevice.1.WLANConfiguration.1.RadioEnabled and InternetGatewayDevice.LANDevice.1.WLANConfiguration.5.RadioEnabled to false Ok, thanks for your help, I’ll try with those parameters.