# Digest Authentication

**URL:** <https://forum.genieacs.com/t/digest-authentication/1045>\
**Category:** Uncategorized\
**Created:** [September 14, 2020, 3:41pm UTC](https://forum.genieacs.com/t/digest-authentication/1045 "2020-09-14T15:41:07Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![Durga](https://avatars.discourse-cdn.com/v4/letter/d/2bfe46/32.png) [@Durga](https://forum.genieacs.com/u/Durga)\
**Post date:** [September 14, 2020, 3:41pm UTC](https://forum.genieacs.com/t/digest-authentication/1045/1 "2020-09-14T15:41:07Z")

</div>

Hi,  
I am very beginner in genieacs. I installed genieacs-gui (version 1.2.1) and CPE got registered. Can you please guide me how to configure below configurations in genieacs-gui.

_InternetGatewayDevice.ManagementServer.ConnectionRequestUsername_ _InternetGatewayDevice.ManagementServer.ConnectionRequestPassword_

I am not seeing ‘config’ tab in below image. I was referring this link  
[https://github.com/genieacs/genieacs/wiki/GenieACS-Auth-Config#acs-to-cpe](https://github.com/genieacs/genieacs/wiki/GenieACS-Auth-Config#acs-to-cpe), but i could not able to find “auth.js” in genieacs-gui folder.

 ![image](https://canada1.discourse-cdn.com/flex035/uploads/genieacs/original/1X/c96e9728ac9b399ff244f611707863609b86edca.png)

Thanks  
Durga K

---

<div class="post-metadata">

**Author:** ![Rocket78](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/rocket78/32/267_2.png) [@Rocket78](https://forum.genieacs.com/u/Rocket78)\
**Post date:** [September 14, 2020, 7:38pm UTC](https://forum.genieacs.com/t/digest-authentication/1045/2 "2020-09-14T19:38:45Z")

</div>

In Admin-\>Config add “New config” with key cwmp.connectionRequestAuth and value AUTH(“cpeuser”, “password”). Obviously with your desired data.

---

<div class="post-metadata">

**Author:** ![Durga](https://avatars.discourse-cdn.com/v4/letter/d/2bfe46/32.png) [@Durga](https://forum.genieacs.com/u/Durga)\
**Post date:** [September 14, 2020, 9:53pm UTC](https://forum.genieacs.com/t/digest-authentication/1045/3 "2020-09-14T21:53:44Z")

</div>

Hi @Rocket78,

I did not see any admin tab in genieacs gui.

Thanks  
Durga K

---

<div class="post-metadata">

**Author:** ![Durga](https://avatars.discourse-cdn.com/v4/letter/d/2bfe46/32.png) [@Durga](https://forum.genieacs.com/u/Durga)\
**Post date:** [September 15, 2020, 1:26am UTC](https://forum.genieacs.com/t/digest-authentication/1045/4 "2020-09-15T01:26:26Z")

</div>

Hi,

I am using genieacs gui 1.2.1. I did not see config tab in gui. Can you please guide me.

Thanks  
Durga

---

<div class="post-metadata">

**Author:** ![zaidka](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/zaidka/32/9_2.png) [@zaidka](https://forum.genieacs.com/u/zaidka)\
**Post date:** [September 15, 2020, 6:51pm UTC](https://forum.genieacs.com/t/digest-authentication/1045/5 "2020-09-15T18:51:44Z")

</div>

You’re using the old genieacs-gui. GenieACS 1.2 comes with its own UI so you should be using that one instead.

---

<div class="post-metadata">

**Author:** ![Durga](https://avatars.discourse-cdn.com/v4/letter/d/2bfe46/32.png) [@Durga](https://forum.genieacs.com/u/Durga)\
**Post date:** [September 15, 2020, 7:05pm UTC](https://forum.genieacs.com/t/digest-authentication/1045/6 "2020-09-15T19:05:01Z")

</div>

Thanks @zaidka.

Can you please give me link from where I can able to get installation steps for genieacs 1.2

---

<div class="post-metadata">

**Author:** ![zaidka](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/zaidka/32/9_2.png) [@zaidka](https://forum.genieacs.com/u/zaidka)\
**Post date:** [September 15, 2020, 7:13pm UTC](https://forum.genieacs.com/t/digest-authentication/1045/7 "2020-09-15T19:13:53Z")

</div>

> **[Installation Guide — GenieACS Documentation 1.2.1 documentation](http://docs.genieacs.com/en/latest/installation-guide.html)**

---

<div class="post-metadata">

**Author:** ![Durga](https://avatars.discourse-cdn.com/v4/letter/d/2bfe46/32.png) [@Durga](https://forum.genieacs.com/u/Durga)\
**Post date:** [September 16, 2020, 1:48pm UTC](https://forum.genieacs.com/t/digest-authentication/1045/8 "2020-09-16T13:48:51Z")

</div>

Hi,

I have installed genieacs 1.2.1. I am trying to configure “authConnectionRequest” . it is throwing expression error. Can you please help me?

 ![image](https://canada1.discourse-cdn.com/flex035/uploads/genieacs/original/1X/321f782d137d111f826889c19c3ed281584582d3.png)

---

<div class="post-metadata">

**Author:** ![zaidka](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/zaidka/32/9_2.png) [@zaidka](https://forum.genieacs.com/u/zaidka)\
**Post date:** [September 16, 2020, 5:54pm UTC](https://forum.genieacs.com/t/digest-authentication/1045/9 "2020-09-16T17:54:23Z")

</div>

You’re using those fancy double quotes 🙂 Try the regular ASCII double or single quotes.