# Cudy WAN protocol

**URL:** <https://forum.genieacs.com/t/cudy-wan-protocol/6850>\
**Category:** Uncategorized\
**Created:** [May 13, 2025, 12:59pm UTC](https://forum.genieacs.com/t/cudy-wan-protocol/6850 "2025-05-13T12:59:30Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![yehudah](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/yehudah/32/2443_2.png) [@yehudah](https://forum.genieacs.com/u/yehudah)\
**Post date:** [May 13, 2025, 12:59pm UTC](https://forum.genieacs.com/t/cudy-wan-protocol/6850/1 "2025-05-13T12:59:31Z")

</div>

HI,

I have a couple of routers. They are connecting via DHCP, PPPoE or Static. Am I able to see what protocol is being used on a router?

---

<div class="post-metadata">

**Author:** ![akcoder](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/akcoder/32/11_2.png) [@akcoder](https://forum.genieacs.com/u/akcoder)\
**Post date:** [May 13, 2025, 5:15pm UTC](https://forum.genieacs.com/t/cudy-wan-protocol/6850/2 "2025-05-13T17:15:22Z")

</div>

You are able to see what the CPE exposes. nothing more.

---

<div class="post-metadata">

**Author:** ![yehudah](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/yehudah/32/2443_2.png) [@yehudah](https://forum.genieacs.com/u/yehudah)\
**Post date:** [May 14, 2025, 9:50am UTC](https://forum.genieacs.com/t/cudy-wan-protocol/6850/3 "2025-05-14T09:50:07Z")

</div>

Thank you, I found what paremeter effects this.  
Device.IP.Interface.1.IPv4Address.1 is for static  
Device.IP.Interface.1.IPv4Address.2 is for DHCP  
Device.IP.Interface.1.IPv4Address.3 is for IPCP