# cpeFaultCode="9003" cpeFaultString="Invalid arguments" TR181 data model

**URL:** <https://forum.genieacs.com/t/cpefaultcode-9003-cpefaultstring-invalid-arguments-tr181-data-model/1014>\
**Category:** Uncategorized\
**Created:** [September 4, 2020, 10:15am UTC](https://forum.genieacs.com/t/cpefaultcode-9003-cpefaultstring-invalid-arguments-tr181-data-model/1014 "2020-09-04T10:15:14Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![topeqin](https://avatars.discourse-cdn.com/v4/letter/t/c37758/32.png) [@topeqin](https://forum.genieacs.com/u/topeqin)\
**Post date:** [September 4, 2020, 10:15am UTC](https://forum.genieacs.com/t/cpefaultcode-9003-cpefaultstring-invalid-arguments-tr181-data-model/1014/1 "2020-09-04T10:15:14Z")

</div>

Hello zaidka  
this is my first time to use latest genieacs1.2.0 version. When CPE was found by GenieACS first time from the log, I can see below log with [WARN].

would you give me a tip where to trace the setpv failed 9003 error?  
if need pass connection request? or some admin/Config I need set?

2020-09-04T04:55:02.498Z [INFO] 10.10.10.6 BRCM-dslcpe-123456789: Inform; cpeRequestId=“1” informEvent=“0 BOOTSTRAP,1 BOOT,2 PERIODIC” informRetryCount=0  
2020-09-04T04:55:02.656Z [INFO] 10.10.10.6 BRCM-dslcpe-123456789: ACS request; acsRequestId=“1745777ca550000” acsRequestName=“GetParameterNames”  
2020-09-04T04:55:02.690Z [INFO] 10.10.10.6 BRCM-dslcpe-123456789: ACS request; acsRequestId=“1745777ca550001” acsRequestName=“GetParameterNames”  
2020-09-04T04:55:02.708Z [INFO] 10.10.10.6 BRCM-dslcpe-123456789: ACS request; acsRequestId=“1745777ca550002” acsRequestName=“GetParameterValues”  
2020-09-04T04:55:02.740Z [INFO] 10.10.10.6 BRCM-dslcpe-123456789: ACS request; acsRequestId=“1745777ca550003” acsRequestName=“SetParameterValues”  
2020-09-04T04:55:02.775Z [WARN] 10.10.10.6 BRCM-dslcpe-123456789: CPE fault; acsRequestId=“1745777ca550003” cpeFaultCode=“9003” cpeFaultString=“Invalid arguments”  
2020-09-04T04:55:02.775Z [WARN] 10.10.10.6 BRCM-dslcpe-123456789: Channel has faulted; channel=“bootstrap” retries=0 faultCode=“cwmp.9003” faultMessage=“Invalid arguments”  
2020-09-04T04:55:02.776Z [WARN] 10.10.10.6 BRCM-dslcpe-123456789: Channel has faulted; channel=“default” retries=0 faultCode=“cwmp.9003” faultMessage=“Invalid arguments”  
2020-09-04T04:55:02.776Z [WARN] 10.10.10.6 BRCM-dslcpe-123456789: Channel has faulted; channel=“inform” retries=0 faultCode=“cwmp.9003” faultMessage=“Invalid arguments”  
2020-09-04T04:55:02.785Z [INFO] 10.10.10.6 BRCM-dslcpe-123456789: ACS request; acsRequestId=“1745777ca550300” acsRequestName=“SetParameterValues”  
2020-09-04T04:55:02.812Z [WARN] 10.10.10.6 BRCM-dslcpe-123456789: CPE fault; acsRequestId=“1745777ca550300” cpeFaultCode=“9003” cpeFaultString=“Invalid arguments”

 ![image](https://canada1.discourse-cdn.com/flex035/uploads/genieacs/original/1X/1c35c204509cbc0b1b8eccdb0340115cc8158a8b.jpeg)

Thanks,  
Qin Guang

---

<div class="post-metadata">

**Author:** ![zaidka](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/zaidka/32/9_2.png) [@zaidka](https://forum.genieacs.com/u/zaidka)\
**Post date:** [September 15, 2020, 9:21pm UTC](https://forum.genieacs.com/t/cpefaultcode-9003-cpefaultstring-invalid-arguments-tr181-data-model/1014/2 "2020-09-15T21:21:23Z")

</div>

Enable debug log by setting the option `cwmp.debug` (from admin -\> config). Value should be something like this:

```
DeviceID.ID = "<your device ID>"

```

Review the logs to see which particular request causing this fault.

---

<div class="post-metadata">

**Author:** ![topeqin](https://avatars.discourse-cdn.com/v4/letter/t/c37758/32.png) [@topeqin](https://forum.genieacs.com/u/topeqin)\
**Post date:** [September 16, 2020, 3:15am UTC](https://forum.genieacs.com/t/cpefaultcode-9003-cpefaultstring-invalid-arguments-tr181-data-model/1014/3 "2020-09-16T03:15:57Z")

</div>

zaidka  
thanks your comments, will try it later.  
Thanks  
QG
