# Config LAN to Bridge

**URL:** <https://forum.genieacs.com/t/config-lan-to-bridge/1453>\
**Category:** Uncategorized\
**Created:** [February 14, 2021, 10:42am UTC](https://forum.genieacs.com/t/config-lan-to-bridge/1453 "2021-02-14T10:42:38Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![isadmin](https://avatars.discourse-cdn.com/v4/letter/i/48db29/32.png) [@isadmin](https://forum.genieacs.com/u/isadmin)\
**Post date:** [February 14, 2021, 10:42am UTC](https://forum.genieacs.com/t/config-lan-to-bridge/1453/1 "2021-02-14T10:42:38Z")

</div>

Hi Team,  
Is it possible to config LAN port to Bridge mode of ONU.? I’m able to access and configure ONU but didn’t find option to bridge lan port of ONU.

---

<div class="post-metadata">

**Author:** ![JonasGhost](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.genieacs.com/jonasghost/32/286_2.png) [@JonasGhost](https://forum.genieacs.com/u/JonasGhost)\
**Post date:** [February 19, 2021, 8:42am UTC](https://forum.genieacs.com/t/config-lan-to-bridge/1453/2 "2021-02-19T08:42:06Z")

</div>

Yes is possible, but that has to be done on the onu. If you want to switch remote between routed and bridge, you could create 2 configuration files, that are pushed over the acs.

That depends all on the ONU you are using.

---

<div class="post-metadata">

**Author:** ![isadmin](https://avatars.discourse-cdn.com/v4/letter/i/48db29/32.png) [@isadmin](https://forum.genieacs.com/u/isadmin)\
**Post date:** [February 21, 2021, 12:51pm UTC](https://forum.genieacs.com/t/config-lan-to-bridge/1453/3 "2021-02-21T12:51:39Z")

</div>

Thanks for sharing… I already got the data model n its working fine.